Heavy Duty Lifting Sling

Heavy Duty Lifting Sling

$295.00
Skip to product information
Heavy Duty Lifting Sling

Heavy Duty Lifting Sling

$295.00
Compatible with:
Badger Box

Heavy-Duty 4-Leg Nylon Web Sling for Trench Box Rigging

The 4-Leg Nylon Web Sling provides secure, balanced rigging for trench boxes, aluminum panels, and heavy excavation equipment. Rated for 6,000 lbs Working Load Limit (WLL) at 60-degree choke angle, this 21 × 5 nylon web sling delivers industrial-strength lifting capacity with the flexibility needed for safe trench box handling and positioning.

Why Choose This Nylon Web Sling

  • 6,000 lb Working Load Limit: Ample capacity for trench boxes, panel assemblies, and heavy shoring equipment
  • Four-Leg Balance: Equal load distribution prevents tipping during crane or excavator lifts
  • Nylon Web Construction: Flexible rigging that won’t damage aluminum panels or painted surfaces
  • Lightweight (10 lbs): Minimal burden when prepping rigging assemblies or moving between job sites

When to Use Heavy-Duty Rigging Slings

Use this sling for mechanical lifting of trench boxes, aluminum panel systems, or any excavation equipment requiring secure, balanced rigging. The four-leg configuration is essential for stable trench box lifts—matching the attachment points on lifting bracket sets for proper load distribution.

They’re especially valuable for:

  • Crane-assisted trench box placement and removal operations
  • Excavator-lifted positioning for utility trenching projects
  • Repositioning equipment along extended excavation runs
  • Moving trench boxes between job sites on flatbed trucks
  • Any rigging operation where aluminum equipment requires non-abrasive sling contact

Why Nylon Web Slings Matter for Trench Equipment

Chain rigging works, but it damages aluminum—gouging panels, scratching protective coatings, creating stress points that compromise structural integrity. Wire rope creates similar problems with abrasion and point-loading on corners.

Nylon web slings distribute contact pressure across wider surface areas, protecting aluminum trench boxes during lifts. The flexibility conforms to attachment points without rigid edge contact, and the material won’t corrode aluminum through galvanic reaction like steel rigging can. For contractors protecting equipment investment, nylon slings extend trench box service life by eliminating lifting damage.

Technical Specifications

  • Working Load Limit (WLL): 6,000 lbs at 60-degree choke angle
  • Construction: 21 × 5 nylon web sling
  • Configuration: 4-leg sling (code: 4N-X-H)
  • Material: Nylon web (code: N)
  • Link Type: Special 5/8” oblong link (code: X)
  • Hook Type: 1-ton hook with latch (code: H)
  • Weight: 10 lbs
  • Packaged Dimensions: 11.25” × 8.75” × 6”
  • Compliance: ASME B30.9, OSHA 1926 Subpart CC
Compatible Systems

  • Badger Box Trench Systems (with lifting brackets)
  • Aluminum Panel Shield Systems (with lifting brackets)
  • Buildable Box Systems (with lifting brackets)
  • Any trench box or shoring equipment with properly rated lifting points
  • General excavation equipment requiring nylon web rigging
Safety & Compliance

This sling is rated for 6,000 lbs Working Load Limit at 60-degree choke angle. Load capacity decreases with steeper rigging angles—consult rigging angle charts before use. Inspect sling before each deployment for cuts, abrasion, UV damage, or chemical exposure. Remove from service immediately if damage is detected. Follow OSHA 1926 Subpart CC (Cranes and Derricks) and ASME B30.9 (Sling Safety Standards). Never exceed rated capacity or use damaged slings.

Primary Applications

∙Trench box and aluminum panel system rigging
∙Badger Box and modular shoring equipment lifting
∙Infrastructure and utility construction equipment handling
∙Civil construction projects requiring heavy-duty load-bearing rigging
∙Any operation moving excavation safety equipment with cranes or excavators

You may also like